by csmills | Aug 3, 2012 | Testimonials
This Roundtop timber fence is 1.2m high, with 1.8m x 125mm x 125mm Larch posthead posts used with 4.8m x 100mm x 44mm backing rail. Roundtop boards are 1.2m x 145mm x 20mm high. The roundtop fence was erected in straffan on same site as the ‘strafan wooden...
by csmills | Aug 3, 2012 | Testimonials
These actual gates are 1.5m high with an opening of 3.6m between posts. Manufactured from imported swedish redwood 125mm x 70mm in the frame, vertical sheeting is native Larch Redwood 150mm x 30mm T&G&V. Sheeting is screwed from rear of gate to horizontal...
by csmills | Jul 27, 2012 | Testimonials
This morticed fence, using 1.8m x 150mm x 150mm morticed special top posts and using 4.8m x 150mm x 44mm – 3 rails. Timber was pressure treated green with Osmoses Naturewood and customer stained fence after being fitted. Approx height to top of post is 1.2m...
by csmills | Jul 27, 2012 | Testimonials
Heavy top rail 118mm x 70mm and also heavy bottom rail 118mm x 70mm with standard cross rails 70mm x 30mm in between. Made from Swedish Redwood and pressure treated with Osmoses Naturewood. View all our other timber gates & products on our website...
by csmills | Jul 27, 2012 | Testimonials
Materials used were 2.4m x 125mm x 125mm special top morticed posts x 4 rail, 4.8m x 125mm x 44mm Rails. Post centres are 2.4m. Height of fence is approx 1.5m. Timber was pressure treated green with Osmoses Naturewood and the customer cresoted fence after fence was...
by csmills | Jul 11, 2012 | Testimonials
AFTER This timber deck was fitted at rear of building with door walking out. Sizes 5.7m x 2.1m. Framing 2.2m x 150mm x 44mm was used for underneath deck, and 125mm x 35mm deckboards were used for sheeting. Newel posts 100mm x 100mm were used with 41mm x 41mm...
